Filter
Top Products
78 TASCAM LR-10
12–Using the built-in effects
This unit has built-in eects that can be applied to the input
signal during both practice and recording.
Turning the effects ON and OFF
Press the EFFECT button briey to turn the eects ON or OFF.
When ON, the eect last set on the
EFFECT
Screen becomes
active, and the FX icon ( ) appears as light letters on a
dark background.
Setting the effect
Press and hold the EFFECT button to open the
EFFECT
screen.
Use the Â/¯ buttons to select the desired item. (When
selected, the setting value appears as light letters on a dark
background.) Use the VALUE (+/–) buttons to change the
setting value.
REVERB
Select the type of reverb to use.
LEVEL knob
Use the REVERB item to adjust the output level of the selected
reverb type.
TIME knob
Use the
PRESET
item to adjust the reverb time of the selected
reverb type. The reverb time range is set optimally for each
type of reverb. For this reason, the length of the reverb might
dier between reverb types even with the same setting value.
SOURCE
Use this to set whether the eect is applied to the input signal
(
INPUT
) or the playback signal (
PLAY
).
The default setting is
PLAY
.