Filter
Top Products
TASCAM LR-10 73
NOTE
When the
•
LOOP SET
pop-up window is open, press the Á
button to playback, press
[ª]button to, and press the
Ô or button briey to search the le.
Press and hold the
•
Ô or button to move the IN
(starting) or OUT (ending) point. (This is not possible when
there is no IN (starting) and OUT (ending) point.)
Press the
•
[ª] button during playback to pause, and
press the HOME button when paused to returned to the
Home Screen.
5. Next, use the same buttons to move the OUT (ending)
point to the desired position, and press the ¯
button to save the OUT (ending) point.
NOTE
Use the
•
 and ¯ buttons to switch between IN
(starting) and OUT (ending) points.
6. Press the LOOP button briefly to start loop playback.
Using loop playback with the playlist
When the playback area is set to playlist, up to 5 loops with
distinct IN (starting) and OUT (ending) points can be set per
le.
Follow the procedures below to set and play back loops of
desired intervals in a le.
Loop settings for a le are saved until it is removed from the
playlist.
1. Press the LOOP button to show the LOOP setting area
at the bottom of the display. The word
LOOP
is followed
by a number. Use the VALUE (+/–) buttons to set the
number to
1
–
5
.
10–Loop Playback/Repeat Playback/Single Track Playback