Filter
Top Products
TASCAM LR-10 39
3–Preparation
Inserting and removing SD cards
Inserting an SD card
The SD card slot is inside the battery compartment on the
bottom of the case. Insert the SD card here.
NOTE
An SD card is already in the unit when it is purchased. You can
use this SD card as is for recording and playback. There is no
need to reinsert it.
1. Remove the battery compartment cover. If there are
batteries in the compartment, confirm that the unit
power is OFF and then remove them.
2. Insert the SD card into the SD card slot in the back of
the battery compartment in the direction shown in the
illustration until it clicks into the place.
3. Insert the card and close the cover.
If you are using batteries, insert them first before closing
the cover