Filter
Top Products
56
TASCAM HS-20
8 – Take mode
In this chapter, we explain how to use the take mode. To use this
unit in take mode, set the unit’s operation mode to TAKE MODE.
(See “Selecting the operation mode” on page 38.)
Refer to “4 – Basic operation” on page 26 also when reading
this chapter.
Preparing to record
Basic preparations
Refer to “4 – Basic operation” on page 26 and make the basic
preparations for recording.
Creating new folders
Create new folders as necessary. You do not need to create a
new folder if you plan to record into an existing one.
1. Press the FILE LIST key on the front of the unit to open the
take selection screen. Then, press the FILE LIST key again to
open the folder selection screen.
2 Touch the NEW FOLDER button on the pull-up menu to
open the NEW FOLDER screen where you can input the
folder name.
Follow the procedures “Editing the name of a folder in the
root directory” on page 33 to input the folder name.
NOTE
You cannot use the “@” symbol at the beginning of a folder
name.
3. Touch the Enter button or press the DATA dial.
4. Touch the OK button or press the DATA dial when the confir-
mation pop-up message appears.
When creation of the folder completes, the Home Screen
reopens.
For details about folder operations, see “Folder operations”
on page 35.
Recording mode settings
1. Press the MENU key on the front panel to open the MENU
screen.
2. Touch the REC SETUP button to open the REC SETUP screen.
On the REC MODE page, you can select the recording mode.
The background color for the selected mode is light blue.
For details, see “REC MODE page” on page 77
Setting the file format
Touch the FILE FORMAT tab on the REC SETUP screen to open
the following screen.
On the FILE FORMAT page, set bit-length, maximum file size,
how files are treated when recording is paused, and the
recording sampling frequency. The selected items have a light
blue background.
For details, see “FILE FORMAT page” on page 79.