Filter
Top Products
54
TASCAM HS-20
7 – Timeline mode
Undoing the previous edit (UNDO)
You can undo the previous timeline edit.
1. Press the HOME key on the front of the unit to open the
Home screen.
2. Touch the EDIT MODE button to enter edit mode.
3. Touch the EDIT button to open the pull-up menu.
4. Touch the UNDO button on the pull-up menu. After the
edit is undone, the Home Screen will open after a pop-up
window is shown.
In this case, the EDIT pull-up menu will remain open.
NOTE
•
The UNDO button on the Fade/Level pull-up menu can also
be used to undo an edit.
•
If no editing has been conducted, the UNDO button is
disabled. The UNDO button appears with white letters when
it is possible to undo an edit.
•
The timeline mode can store up to 10 of the most recent
recording/editing operations. You can undo and redo
editing within this editing history range .
However, when the frequency of editing or the number of
regions increases, the number of operations that can be
stored might decrease to less than 10.
•
The timeline mode editing history will be erased by the
following actions.
•
Turning off the unit
•
Loading a folder
•
Loading AES31 editing information
•
Changing the operation mode
Redoing an edit (REDO)
After undoing an edit, you can redo it.
1. Press the HOME key on the front of the unit to open the
Home screen.
2. Touch the EDIT MODE button to enter edit mode.
3. Touch the EDIT button to open the pull-up menu.
4. Touch the REDO button on the pull-up menu. When the edit
is redone, the Home Screen will open after a pop-up window
is shown.
In this case, the EDIT pull-up menu will remain open.
NOTE
•
The REDO button on the Fade/Level pull-up menu can also
be used to redo an edit.
•
If no edit has been undone, the REDO button is disabled. The
REDO button appears with white letters when it is possible
to redo an edit.
•
The timeline mode can store up to 10 of the most recent
recording/editing operations. You can undo and redo
editing within this editing history range .
•
However, when the frequency of editing or the number of
regions increases, the number of operations that can be
stored might decrease to less than 10.
•
The timeline mode editing history will be erased by the
following actions.
•
Turning off the unit
•
Loading a folder
•
Loading AES31 editing information
•
Changing the operation mode