Filter
Top Products
TASCAM HS-20
47
7 – Timeline mode
Copying the data in the selection (Copy)
You can copy the selection.
NOTE
•
The copied data will be saved in the copy buffer.
•
When the whole fade (in/out) area is included, the fade
information will also be retained.
Copy buffer
Selected range
1. Press the HOME key on the front of the unit to open the
Home screen.
2. Touch the EDIT MODE button to enter edit mode.
3. Move the timeline cursor to the selection to copy.
4. Touch the SET/SELECT button and select the range that you
want to copy using the SET IN, SET OUT and SELECT Region
buttons on the pull-up menu.
5. Touch the EDIT button to open the pull-up menu.
6. Touch the Copy button on the pull-up menu. When copying
is complete, the Home Screen will open after a pop-up
window is shown.
In this case, the EDIT pull-up menu will remain open.
Cutting the data in the selection (Cut)
You can erase the selection and move the following data
forward.
NOTE
•
The data cut is saved in the copy buffer.
•
When the whole fade (in/out) area is included, the fade
information will also be retained.
•
When the IN point or OUT point is within a region, the part
outside of the selection will become a new region.
•
When the IN point or OUT point is set within a fade-in or
fade-out, the fade information will be cleared.
1. Press the HOME key on the front of the unit to open the
Home screen.
2. Touch the EDIT MODE button to enter edit mode.
3. Move the timeline cursor to the area you want to cut.
4. Touch the SET/SELECT button and select the range that you
want to cut using the SET IN, SET OUT and SELECT Region
buttons on the pull-up menu.
5. Touch the EDIT button to open the pull-up menu.
6. Touch the Cut button on the pull-up menu. When cutting
is complete, the Home Screen will open after a pop-up
window is shown.
In this case, the EDIT pull-up menu will remain open.