Filter
Top Products
106
TASCAM HS-20
11 – Mark and locate functions
Locating to marks
Touch a
button to locate to the corresponding mark.
Viewing mark information
Touch the LIST INFO button on the MARK LIST screen to open
the LIST INFO page.
This screen shows a list of the number of marks by type in the
currently loaded take.
Touch the LIST INFO button again to return to the MARK LIST
screen.
Mark list information screen
NOTE
After recording, the MARK LIST screen might show a TOTAL
number of marks that is 2 or 3 greater than the sum of
the MANUAL MARK, TIME, OVER and UNLK marks. This is
because the total includes REC, END and PRE (when prere-
cording) marks that are created during recording.
Deleting marks
1. Select the mark that you want to delete on the MARK LIST
screen.
MARK LIST screen
2. Touch the DELETE button on the MARK LIST screen.
3. Another pop-up window appears to reconfirm.
Touch the OK button or press the DATA dial to delete the
mark.
Deleting a mark using the MARK LIST screen
NOTE
On the mark list information screen, you can delete marks
or types of marks by selecting them and touching the
DELETE button.
When you do this, a “Delete all marks of this type?” confir-
mation pop-up appears. Touch the OK button or press the
DATA dial to delete all the marks of the same type.
Mark list information screen
Deleting marks using the mark list information screen