Sony CMT-M100MD Stereo System User Manual


 
8
Setting the clock
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
Proceed to step 5 when you set the clock for
the first time.
3 Press . or > on the remote
repeatedly until “CLOCK SET” appears.
4 Press ENTER/YES on the remote.
The hour indication flashes.
5 Press . or > on the remote to set
the hour.
6 Press ENTER/YES or CURSORt on
the remote.
The minute indication flashes.
7 Press . or > on the remote to set
the minute.
8 Press ENTER/YES on the remote.
The clock starts working.
To adjust the clock
Start over from step 2.
Saving power in standby
mode
Even if the system is off, the system consumes
power to display the clock and to stay
responsive to commands from the remote. The
power saving mode is introduced to reduce the
amount of power consumed during standby.
In this mode, the clock is not displayed.
To change to power saving mode, press
DISPLAY on the remote repeatedly
while the system is off until the
demonstration and the clock display
disappear.
To change the display
Press DISPLAY on the remote repeatedly
while the system is off.
Each time you press the button, the display
changes cyclically as follows:
Demonstration mode t Clock display* t
Power saving mode
* The clock is displayed only when you have set the
clock.
To cancel power saving mode
Press DISPLAY on the remote repeatedly
while the system is off until the demonstration
or the clock display appears.
Tip
The timer continues to operate during power saving
mode.