Filter
Top Products
58
The sound skips.
• Wipe the CD clean (see page 55).
• Replace the CD.
• Try moving the system to a place without
vibration (e.g., on top of a stable stand).
• Try moving the speakers away from the system,
or placing them on separate stands.
When you listen to a track with bass sounds at
high volume, the speaker vibration may cause the
sound to skip.
Play does not start from the first track.
• Press PLAY MODE/DIRECTION (or PLAY
MODE on the remote) repeatedly until both
“PGM” and “SHUF” disappear to return to
normal play.
“OVER” appears.
• You have reached the end of the CD. Press and
hold m or press . to return to the desired
playing position.
MD Deck
An MD cannot be inserted.
• Insert the MD with the label side up and the
arrow pointing toward the deck.
The controls do not work.
• Replace the MD with a new one.
• Retry the operations after “TOC” or
“STANDBY” turns off.
Play does not start.
• Replace the MD.
• Insert the MD and leave the system turned on for
a few hours until the moisture evaporates.
• Press MD NX to start play.
• Press GROUP on the remote to turn off the
GROUP indicator.
The timer does not function.
• Press CLOCK/TIMER SELECT on the remote to
set the timer and light up “cDAILY” or
“cREC” in the display (see pages 50 and 52).
• Check the set contents and set the correct time
(see pages 50 and 52).
• Cancel the Sleep Timer Function (see page 49).
The remote does not function.
• Remove the obstacle.
• Move the remote closer to the system.
• Point the remote at the system’s sensor.
• Replace the batteries (R6/size AA).
• Locate the system away from the fluorescent
light.
CD Player
The CD tray does not close.
• Place the CD correctly in the centre of the tray.
• Always close the tray by pressing Z CD. Trying
to press the tray closed with your fingers may
cause problems with the CD player.
The CD does not eject.
• Consult your nearest Sony dealer.
Play does not start.
• Open the CD tray and check whether a CD is
loaded.
• Wipe the CD clean (see page 55).
• Replace the CD.
• Place the CD correctly in the centre of the tray.
• Place the CD in the tray with the label side up.
• Remove the CD and wipe away the moisture on
the CD, then leave the system turned on for a
few hours until the moisture evaporates.
• Press CD NX to start play.
Troubleshooting (continued)