Filter
Top Products
48
Recording an MD on a tape
(continued)
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
• If you select both sides recording and the tape
reaches the end of the top side part-way through a
track, the entire track is recorded again from the
beginning of the bottom side.
• You can record only your favourite MD tracks with
Programme Play. After step 2, follow the same
procedures as from step 1 to 5 of “Programming
MD tracks” on page 17, then go to step 3.
Note
If the tape becomes full during recording, the MD
deck and the tape deck stop automatically.
Recording on a tape
manually
— Manual Recording
You can record just the portions you like from
a CD or an MD on a tape. You can also record
a radio programme.
You can use TYPE I (normal) tape.
1 Load a recordable tape.
2 Press FUNCTION repeatedly to select
the desired source to record.
3 Press z TAPE.
The tape deck stands by for recording.
Press TAPE nN again to record on the
bottom side.
4 Press PLAY MODE/DIRECTION
repeatedly until g appears to record
on one side or h (or j) to record on
both sides.
5 Press X TAPE, then start playing the
desired source to record.
To stop recording
Press x.
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
• If you select both sides recording and the tape
reaches the end of the top side part-way through a
track, the entire track is recorded again from the
beginning of the bottom side.