Filter
Top Products
37
MD – Editing
5 While monitoring the sound, press l
or L (or . or > on the remote)
repeatedly to find the starting point of
the portion to be erased (point A).
You can shift the starting point by
1/86 second (1 frame) intervals*.
To shift the point by second or minute
intervals, press m or M so that second
or minute flashes, then press l or L
(or . or > on the remote).
* You can shift the starting point by 2-frame
intervals (in Monaural mode and LP2 Stereo
mode) or by 4-frame intervals (in LP4 Stereo
mode).
6 Repeat step 5 until point A is played
correctly.
7 Press ENTER/YES on the remote if
point A is correct.
“Point B set” appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
8 Continue playback until the deck
reaches point B, then press ENTER/
YES on the remote.
“A-B Ers” and “Point B ok?” appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
9 Press l or L (or . or > on
the remote) repeatedly to find point B.
The procedure is the same as step 5.
10
Press ENTER/YES on the remote if
point B is correct.
“Complete!” appears.
Moving recorded tracks
— Move Function
You can use this function to change the order
of any track on the disc. When you move
tracks, the tracks are automatically
renumbered.
Example: Moving track 3 to position 2.
123
1
23
4
4
AB C D
CBDA
Track number
Original
tracks
After
MOVE
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO on the remote to
display “Edit Menu”.
3 Press l or L (or . or > on
the remote) repeatedly until “Move?”
appears, then press ENTER/YES on the
remote.
4 Press l or L (or . or > on
the remote) repeatedly until the desired
track number to move appears, then
press ENTER/YES on the remote.
continued