Filter
Top Products
17
MD – Play
Press CLEAR on the remote in
stop mode. Each time you press
the button, the last programmed
track is erased.
Press l or L (or . or
> on the remote) repeatedly
during Programme Play.
Press DISPLAY on the remote in
stop mode. The total number of
programmed steps appears,
followed by the last programmed
track number and the total playing
time of the programme.
Press PLAY MODE/DIRECTION
(or PLAY MODE on the remote)
in stop mode repeatedly until both
“PGM” and “SHUF” disappear.
Check the total
number of
programmed
tracks
Cancel
Programme Play
Perform steps 3 and 4.
Check the
programme order
Add a track to
the end of the
programme in
stop mode
Erase a track
5 To programme additional tracks, repeat
steps 3 and 4.
6 Press MD NX.
Other operations
To Do this
Select the desired
track using the
number buttons
on the remote
Press number buttons instead of
performing step 3 through 5. To
use number buttons, see page 16.
Programming MD tracks
— Programme Play
You can make a programme of up to 25 tracks.
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press PLAY MODE/DIRECTION (or
PLAY MODE on the remote) in stop
mode repeatedly until “PGM” appears.
3 Press l or L (or . or > on
the remote) repeatedly until the desired
track number appears.
Selected
track number
Playing time of
the selected track
4 Press ENTER/YES on the remote.
The track is programmed.
“Step” appears, followed by the number of
the track in the programmed sequence. The
last programmed track number appears,
followed by the total playing time of the
programme.
If you made a mistake, you can clear the last
programmed track from the programme by
pressing CLEAR on the remote.
Last programmed
track number
continued
Total
playing time