Sony CMT-M100MD Stereo System User Manual


 
45
Tuner
Labelling the preset
stations
Station Name
You can label each preset station with up to
12 characters (Station Name).
1 Tune the station you want to label (see
Listening to the radio on page 44).
2 Follow the same procedures as from
step 2 to 6 of Labelling a CD on
page 13.
To check the preset number and
frequency
The station name appears when you tuned the
labelled station.
To check the preset number and frequency,
press DISPLAY on the remote. The preset
number and frequency appear, followed by the
station name.
To erase the name
1 Tune the station.
2 Press NAME EDIT/SELECT on the remote.
3 Press CLEAR on the remote repeatedly to
erase the name.
4 Press ENTER/YES on the remote.
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data
System?
Radio Data System (RDS)* is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal.
Note
RDS may not work properly if the station you tuned
in is not transmitting the RDS signal properly or if the
signal is weak.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the
display.
To check the RDS information
Each time you press DISPLAY on the remote,
the display changes cyclically as follows:
Station name* t Frequency t Clock t
BASS t TREBLE
* If the RDS broadcast is not properly received, the
station name may not appear.