Filter
Top Products
18
Programming MD tracks (continued)
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press MD NX. However, the
programme is cleared after you remove the MD or
press GROUP.
• “---.--” appears when the total MD programme time
exceeds 1,000 minutes.
Playing only the tracks in
the desired group
This function allows you to listen only to your
favourite tracks which you have registered into
a group. For details of the Group Function, see
page 20.
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press GROUP on the remote in stop
mode repeatedly until the GROUP
indicator lights up.
3 Press GROUP SKIP on the remote
repeatedly until the desired group
appears.
Proceed to step 5 when you start playing
from the first track in the group.
4 To start playing from a specific track in
the group, press l or L (or . or
> on the remote) repeatedly until the
desired track appears.
5 Press MD NX.
Play starts.
When the playing of the last track in the
group finishes, the MD deck stops
automatically.
Tip
You can perform the operations described under
“Playing an MD” (page 15) and “Programming MD
tracks” (page 17) only for the tracks in the group.
Note
If you select and play a group that does not have any
tracks registered, play starts from the first track of the
first group on the MD.