Filter
Top Products
39
MD – Editing
5 While monitoring the sound, press l
or L (or . or > on the remote)
repeatedly to adjust the point to be
divided.
You can shift the point by 1/86 second
(1 frame) intervals*.
To shift the point by second or minute
intervals, press m or M so that second
or minute flashes, then press l or L
(or . or > on the remote).
* You can shift the starting point by 2-frame
intervals (in Monaural mode and LP2 Stereo
mode) or by 4-frame intervals (in LP4 Stereo
mode).
6 Press ENTER/YES on the remote if the
point to be divided is correct.
“Complete!” appears.
Note
If you divide a labelled track (see “Labelling an MD”
on page 30) into two tracks, only the first track retains
the track title.
Example:
12
12
43
3
45
Andante
Andante
Adagio
Adagio
Allegro
Allegro
The new track is not labelled
Combining recorded
tracks
— Combine Function
You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
You can also use this function to erase
unnecessary track numbers.
Example: Combining track 3 to track 1.
12
12
43
3
A
ACBD
DCB
Track number
Original
tracks
After
COMBINE
Example: Combining track 1 to track 4.
12
12
43
3
4
5
A
BC D A
DCB
Original
tracks
After
COMBINE
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO on the remote to
display “Edit Menu”.
continued