Filter
Top Products
38
Moving recorded tracks (continued)
5 Press l or L (or . or > on
the remote) repeatedly until the new
track position appears.
Original track number New track position
6 Press ENTER/YES on the remote.
“Complete!” appears.
Note
When you move a track to a track number that is
registered into a group, the moved track is re-
registered into the group containing the moved
destination track number. In addition, if you move a
track that is registered into a group to a track number
that is not registered into a group, the group
registration of the moved track is released. However,
when the Group Function is on, you can only move
tracks within the selected group.
Dividing recorded tracks
— Divide Function
You can use this function to mark track
numbers after recording. The total number of
tracks increases by one and all the tracks
following the divided ones are renumbered.
Example: Dividing track 2 into two tracks.
12 3
123 4
A
AB C D
CBD
Track number
Original
tracks
After
DIVIDE
Divide track 2 into
track B and C
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO on the remote to
display “Edit Menu”.
3 Press l or L (or . or > on
the remote) repeatedly until “Divide?”
appears, then press ENTER/YES on the
remote.
4 Press l or L (or . or > on
the remote) repeatedly until the desired
track number to divide appears, then
press ENTER/YES on the remote.
“—Rehearsal—” appears and the portion to
be divided is played repeatedly.