Sony CMT-M100MD Stereo System User Manual


 
44
Listening to the radio
Preset Tuning
Preset radio stations in the system memory first
(see “Presetting radio stations” on page 43).
1 Press TUNER BAND repeatedly to
select FM or AM.
2 Press TUNING MODE repeatedly until
PRESET appears.
3 Press TUNING + or (or or + on the
remote) repeatedly to select the desired
preset station (or station name* or RDS
station name**).
* The station name appears only if you have
labelled the station (see “Labelling the preset
stations” on the next page).
** European model only.
To turn off the radio
Press ?/1.
To enter preset number 10 or higher
on the remote in step 3
1 Press >10.
2 Enter the corresponding number buttons.
To enter 0, press 10/0.
Example:
To enter track number 20, press >10, then 2 and 10/0.
To listen to non-preset radio stations
Press TUNING MODE repeatedly until both
“AUTO” and “PRESET” disappear in step 2,
then press m or M repeatedly to tune in
the desired station (Manual Tuning).
Press TUNING MODE repeatedly until
“AUTO” appears in step 2, then press m or
M. The frequency indication changes and
the scanning stops when the system tunes in
a station (Automatic Tuning).
To cancel Automatic Tuning
Press TUNING MODE.
Tips
To improve broadcast reception, adjust the supplied
aerials, or connect a commercially available
external aerial.
When an FM stereo programme has static noise,
press FM MODE repeatedly until “MONO”
appears. There will be no stereo effect, but the
reception will improve.