Sony CMT-M100MD Stereo System User Manual


 
41
MD Editing
Changing the recorded
level after recording
S.F Edit Function
You can change the volume of recorded tracks
using S.F (Scale Factor) Edit. The original
track is recorded over at the new recording
level. When changing the recording level, you
can select Fade-in Recording to gradually
increase the signal level at the start of
recording, or Fade-out Recording to gradually
decrease the signal level at the end of the
recording.
Changing the overall
recording level
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO on the remote to
display Edit Menu.
3 Press l or L (or . or > on
the remote) repeatedly until S.F Edit?
appears, then press ENTER/YES on the
remote.
4 Press l or L (or . or > on
the remote) repeatedly until Tr Level?
appears, then press ENTER/YES on the
remote.
5 Press l or L (or . or > on
the remote) repeatedly until the track
number you want to change the
recording level appears, then press
ENTER/YES on the remote.
“Level 0dB” appears.
6 While monitoring the sound, press l
or L (or . or > on the remote)
repeatedly to change the recorded
level.
The recording level can be changed from
–12 dB to +12 dB, in 2 dB steps. Change to
the optimum level while making sure that
“OVER” does not appear in the display at
the loudest portion.
7 Press ENTER/YES on the remote.
“S.F Edit OK?” appears.
8 Press ENTER/YES on the remote.
The deck starts recording over the existing
track. “S.F Edit: ** %” appears while the
track is being recorded. An amount of time
that is roughly equal to or longer than the
playback time of the track is required when
recording over the track. When the
recording finishes, “Complete!” appears.
To cancel the operation
Press MENU/NO on the remote during step 3
through 7. After recording starts in step 8, you
cannot interrupt the operation.
Fade-in and Fade-out
Recording
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO on the remote to
display Edit Menu.
3 Press l or L (or . or > on
the remote) repeatedly until S.F Edit?
appears, then press ENTER/YES on the
remote.
continued