Sony CMT-M100MD Stereo System User Manual


 
50
7 Press . or > on the remote
repeatedly until the desired sound
source appears.
Each time you press the button, the
indication changes cyclically as follows:
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
y
MD PLAY
T
8 Press ENTER/YES on the remote.
The start time, the stop time, and the sound
source appear in turn, before the original
display returns.
9 Press ?/1 to turn off the system.
Other operations
To Do this
Check the settings/
activate the timer
1 Press CLOCK/TIMER
SELECT on the remote.
2 Press . or > on the
remote repeatedly until
“DAILY SELECT”
appears, then press
ENTER/YES on the
remote.
Change the setting Start over from step 1.
Cancel the timer 1 Press CLOCK/TIMER
SELECT on the remote.
2 Press . or > on the
remote repeatedly until
“TIMER OFF?” appears,
then press ENTER/YES on
the remote.
Waking up to music
Daily Timer
You can wake up to music at a preset time.
Make sure you have set the clock (see “Setting
the clock” on page 8).
1 Prepare the sound source you want to
play.
CD: Load a CD. To start from a
specific track, make a programme (see
“Programming CD tracks” on page 11).
MD: Load an MD. To start from a
specific track, make a programme (see
“Programming MD tracks” on page 17).
Tape: Load a tape.
Radio: Tune in the preset radio station
(see “Listening to the radio” on
page 44).
2 Press VOLUME + or (or VOL + or on
the remote) to adjust the volume.
3 Press CLOCK/TIMER SET on the
remote to display DAILY SET.
4 Press ENTER/YES on the remote.
“ON” appears and the hour indication
flashes.
5 Set the time to start playing.
Press . or > on the remote repeatedly
to set the hour, then press ENTER/YES on
the remote.
The minute indication flashes.
Press . or > on the remote repeatedly
to set the minute, then press ENTER/YES
on the remote.
6 Set the time to stop playing following
the same procedure as step 5.