Filter
Top Products
Controls, Connectors, Indicators: DN9344E
45
11. FRONT PANEL: DN9344E
11.1. Alphanumeric displays, SETUP, Metering and Power
1 Alphanumeric Displays
for sections 1 and 2
The large red alphanumeric displays can be used to show
electronic scribble-strip information, Last Memory Recalled
or Set Up menu options. There are two displays, one per
section.
2 Input Metering for
sections 1 and 2
Incorporating multi-point clip indication. Meter indicates the
level immediately after the input gain trim.
3
Dynamic EQ
Metering for sections 1
and 2
Four separate meters are provided, to allow continuous
monitoring of all dynamic EQ sections.
4 Output Metering for
sections 1 and 2
Incorporating multi-point clip indication. Meter indicates the
actual output level from the unit, while the red clip light
indicates internal clipping, which is monitored at every
internal processing stage.
5
SETUP button
Press and hold for one second to access Set Up menu, then
press to step through the Set Up pages.
6 Power Switch Power on.
7 Power ON indication Power indication.
1
5
2 3 4
7
6 1
2 3 4