Filter
Top Products
Setup Menu: DN9340E
26
7. SETUP MENU: DN9340E
7.1. General
The DN9340E provides various set up options for adapting the operation of the unit to best suit your
operational requirements and preferences, as follows:
• Comms channel setting for controlling a network remotely
via a PC or using a DN9340E as a master controller (Page 1)
• Front panel lockout for security (Page 2)
• Analogue/digital input select (Page 3)
• Digital output clock select (Page 4)
• Password Page for preset protection (Page 5)
• LCD Display settings (Page 6)
• Unit naming (Page 7)
• Memory naming (Page 8)
• Delay units of measurement (Page 9)
• Power-up logo (Page 10)
• Ethernet settings for remote control operation (Pages 11
and 12)
These options are programmed in the Set Up menu and are described in the following sections in
menu order.
To access the Set Up menu pages
Press HOME (SET UP) to return to the Home page.
Press and hold the HOME (SET UP) button to open the menu.
Press the HOME (SET UP) button repeatedly to step through the pages in turn.
Note This menu does not ‘cycle’. On completing the set up, the menu returns
to the Home page.