Filter
Top Products
Controls, Connectors, Indicators: DN9340E
10
3.4. PC Port, Metering and Power
1 PC port connector 8-pin mini-DIN socket for connecting to an RS-232 serial
port on a PC or other remote control device. (Ethercon
connectors are provided on the rear panel for remote control
via Ethernet.)
2 Input Metering Input metering incorporating multi-point clip indication. This
meter indicates the input level immediately after the input
gain trim.
3
Metering Dynamic EQ metering. Four meters are used for
monitoring the four dynamic EQ filters.
4 Output Metering Output metering incorporating multi-point clip indication.
These meters indicate the actual level leaving the unit, while
the red clip light indicates internal clipping (monitored
throughout the internal processing stages) irrespective of
actual output level.
5 Power Switch Power on.
6 Power ON indication Power indication.
6
1 5
2
3 4