Filter
Top Products
Controls, Connectors, Indicators: DN9340E
9
3.3. Touch Strip, Store and Recall, Home (Setup) and Data Entry
1 Two part touch strip The touchstrip is used to select individual faders or filters
and can also be used to adjust gain settings. Press either
part briefly to select a particular filter or fader. Press and
hold or tap repeatedly to increase the level (upper strip) or
reduce it (lower strip). Note that the lower strip is deeper
than the upper one to reflect that it is generally more urgent
to reduce gain. Pressing the upper and lower strips
simultaneously allows the creation of fader groups.
2
STORE and RECALL
buttons
Used to store complete unit settings to one of the 32 user
memory locations and then to recall them. In addition to
user memories, settings may be recalled from 32 preset
memories that can only be manipulated by means of an
external computer.
3
HOME (SETUP) button
Press once to return to the home page from any of the
individual EQ pages. Once on the home page, press and
hold for one second to access the setup menu. Step
through the setup menu (and exit after the last item) by
repeatedly pressing this button. The HOME (SETUP) button is
also used to exit from STORE and RECALL operations.
4 Left, centre and right
encoder knobs
Used for controlling values and selecting options. Each knob
is surrounded by a blue ring that illuminates to show that
the knob is active in the current mode.
1
4
2 3