Filter
Top Products
58
12
7 Press [OK].
• The cursor moves to the start of the next field.
8 Press the keys in sequence on the Mic keypad to
enter a DTMF number with up to 16 digits.
•You may turn the Tuning control then [
aa
aa
a] to select
each digit. Select a space to include a pause.
9 Press [OK] to complete the selection.
10 Press [MNU] to exit Menu mode.
You can confirm the stored DTMF number by
following steps 1 to 3.
The keypad on the MC-58DM can also be used to
enter alphanumeric characters in step 4. Refer to
page 18.
AUTOMATIC DIALER
If you use the 10 dedicated memory channels to store
DTMF numbers, you need not remember a long string of
digits.
■ Storing a DTMF Number in Memory
Note: Audible DTMF tones from other transceivers near you (or
from your own speaker) may be picked up by your microphone. If
so, you may fail to correctly program a DTMF number.
1 Press [MNU] to enter Menu mode.
2 Select Menu 1–5–1 (STORE), then press [OK].
3 Press [
cc
cc
c]/ [
dd
dd
d] to select a channel from 0 to 9,
then press [OK].
• The display for entering a memory name appears
and the first digit blinks.
•To skip naming the channel, press [OK] again. You
can jump to step 8.
4 Turn the Tuning control to select a character.
•You can enter alphanumeric characters and special
ASCII characters.
5 Press [
aa
aa
a].
• The cursor moves to the next digit.
6 Repeat steps 4 and 5 to enter up to 8 digits.
ciremunahplafostesehtgnomasehctiwS
.sretcarahcIICSAlaicepsdnasretcarahc
neewtebsehctiwS
latipacdnallams
.srettel
yromeMslecnaC
.yrtnEemaN
tatigidehtseteleD
rosruceht
.noitisop
rosrucehtsevoM
.sdrawkcab
ehtstresnI
detcelesyltnerruc
.retcarahc
DNABtfel(
)LES
dnastigidllasraelC
rosrucehtsnruter
.tigidtsrifehtot