Filter
Top Products
29
6
AUTOMATIC REPEATER OFFSET
This function automatically selects an offset direction,
according to the frequency that you select on the VHF
band. The transceiver is programmed for offset direction
as shown below. To obtain an up-to-date band plan for
repeater offset direction, contact your national Amateur
Radio association.
This complies with the standard ARRL band plan.
+
−
−−
+
S
S
SS
144.0 145.5 146.4 147.0 147.6
145.1 146.0 146.6 147.4 148.0 MHz
S: Sim
p
lex
Note: Automatic Repeater Offset does not function when Reverse is
ON. However, pressing [REV] after Automatic Repeater Offset has
selected an offset (split) status, exchanges the receive and transmit
frequencies.
1 Press [MNU] to enter Menu mode.
2 Press [
cc
cc
c]/ [
dd
dd
d] to select “REPEATER (1–7–)”, then
press [OK].
3 Press [
cc
cc
c]/ [
dd
dd
d] to select “AUTO OFFSET (1–7–2)”,
then press [OK].
4 Press [
cc
cc
c]/ [
dd
dd
d] to switch the function ON (default) or
OFF.
5 Press [OK] to complete the setting.
6 Press [MNU] to exit Menu mode.