Filter
Top Products
10
3
GETTING ACQUAINTED
FRONT PANEL
Note: This section describes only the main functions of the front
panel controls and keys. For the functions not described here, you will
find explanations in the appropriate sections of the manual.
qq
qq
q CALL key
Recalls the Call channel {page 37}. Also starts or
stops Call/VFO Scan {page 52} when in VFO mode,
or Call/Memory Scan {page 52} when in Memory
Recall mode.
ww
ww
w VFO key
Selects the VFO mode. In this mode you can change
the operating frequency using the Tuning control or
Mic [UP]/ [DWN]. Also provides:
• VFO Scan start to scan the entire VFO range
{page 48}.
• Program Scan start to scan a programmed range of
frequencies {page 50}.
ee
ee
e MR key
Selects the Memory Recall mode {page 35}. In this
mode you can change memory channels using the
Tuning control or Mic [UP]/ [DWN]. Also starts
Memory Scan {page 48}.
rr
rr
r Tuning control
When turned, selects:
• Operating frequencies when in VFO mode {page 20}.
• Memory channels when in Memory Recall mode
{page 35}.
• Menu Nos. when in Menu mode {page 22}.
This control is used for various other selections.
When an up arrow (c) and down arrow (d) are
visible as key labels, the Tuning control functions the
same as the up and down arrow keys.
tt
tt
t MHz key
When pressed, selects the MHz mode. In this mode
you can change the operating frequency in 1 MHz
steps or 10 MHz steps {page 20} using the Tuning
control or Mic [UP]/ [DWN]. Also starts MHz Scan
{page 51}.
TM-V708