Filter
Top Products
55
11
DIGITAL CODE SQUELCH (DCS)
USING DCS
1 Press the left or right [BAND SEL] to select band A
or B.
• If necessary, press [F], then the same [BAND SEL] to
recall the sub-band.
2 Press [TONE] to activate the DCS function.
• “DCS” appears when the DCS function is ON.
• Each press of [TONE] changes the selection as Tone ➔
CTCSS ➔ DCS ➔ No selection.
3 Press [F], [T.SEL].
• The current DCS code appears and blinks.
4 Press [
cc
cc
c]/ [
dd
dd
d] to select a DCS code, then press
[OK].
You will hear calls only when the selected code is
received. To answer the call, press and hold Mic [PTT],
then speak into the microphone.
Note: You cannot use DCS with the Tone and CTCSS functions.
320560231502552133314564216137
520170431212162233324664426237
620270341322362343134305726437
130370541522562643234605136347
230470251622662153544615236457
630411551342172653644325456
340511651442472463254625266
740611261542603563454235466
150221561642113173554645307
350521271152513114264565217
450131471252523214464606327
Digital Code Squelch (DCS) is another application which
allows you to ignore (not hear) unwanted calls. It
functions the same way as CTCSS. The only
differences are the encode/ decode method and the
number of selectable codes. For DCS, you can select
from 104 different codes as listed in the table below.
Not Received
Received
DCS code: 125
DCS code: 125
DCS code: 205