Filter
Top Products
44
9
SCAN
Note:
◆ Adjust the squelch level before using Scan. Selecting a squelch
level too low could cause Scan to stop immediately.
◆ While using CTCSS or DCS, Scan stops for any signal received;
however, you will hear audio only when the signal contains the
same CTCSS tone or DCS code that you selected.
◆ When using S-meter Squelch, Scan stops when the received
signal strength matches or exceeds the S-meter setting. Scan
resumes 2 seconds after the signal level drops below the S-meter
setting.
◆ Pressing and holding Mic [PTT] causes Scan to temporarily stop if
it is functioning on a non TX band.
◆ Starting Scan switches OFF the Automatic Simplex Check.
Scan is a useful feature for hands-off monitoring of your
favorite frequencies. Becoming comfortable with all
types of Scan will increase your operating efficiency.
TM-V708
TM-V708
145.430 MHz
Stop
epyTnacS egnaRnacS
nacSOFV
ehtnoelbanutseicneuqerfllA
dnab
nacSyromeM
ehtniderotsseicneuqerF
slennahcyromem
nacSpuorG
ehtniderotsseicneuqerF
gnolebhcihwslennahcyromem
puorgdeificepsehtot
nacSmargorP
egnarehtniseicneuqerfllA
dnabehtnodetceles
nacSzHM
zHM1anihtiwseicneuqerfllA
egnar
nacSOFV/llaC
tnerrucehtsulplennahcllaC
ycneuqerfOFV
nacSyromeM/llaC
detcelesehtsulplennahcllaC
lennahcyromem
This transceiver provides the following scan types, plus
Visual Scan {page 45}. Visual Scan graphically and
simultaneously shows how frequencies in a specific
range are busy.