Filter
Top Products
19
4
OPERATING BASICS
ADJUSTING THE VOLUME
Turn the VOL control clockwise to increase the audio
level and counterclockwise to decrease the audio level.
• If background noise is inaudible because of the Squelch
function, press the Mic PF key assigned the Monitor
function {page 60}, then adjust the VOL control. Press the
PF key again to cancel the Monitor function.
SELECTING A BAND
Press the left [BAND SEL] to select band A, or the right
[BAND SEL] to select band B.
• “PTT” moves to the selected band.
• For band A and B, see page 17.
SWITCHING THE POWER ON/OFF
1 Switch the DC power supply ON.
• If operating mobile, skip this step.
2 Press the PWR switch to switch the transceiver ON.
3 To switch the transceiver OFF, press the PWR switch
again.
4 If operating as a fixed station, switch the DC power
supply OFF.
•You may skip step 3. After switching the transceiver
ON, you can switch it OFF or ON using only the power
switch of the DC power supply.
TM-V708
TM-V708
TM-V708