Filter
Top Products
50
9
6 Press [M.IN].
• The lower limit is stored in the channel.
7 Select your desired frequency for the upper limit.
8 Press [F].
9 Turn the Tuning control, or press Mic [UP]/
[DWN], to select a matching channel (U0 ~ U9).
• For example, if you have selected L3 for the lower
limit in step 5, select U3 for the upper limit.
10 Press [M.IN].
• The upper limit is stored in the channel.
To confirm the stored scan limits, press [MR], then
select the L and U channels.
Note:
◆ The lower limit must have a lower frequency than the upper
limit.
◆ The lower and upper frequency step sizes must be the same.
◆ The lower and upper frequency limits must be selected on the
same band.
PROGRAM SCAN
Program Scan is identical to VFO Scan except that you
select the frequency range of the scan.
■ Setting Scan Limits
You can store up to 10 scan ranges in memory
channels L0/U0 to L9/U9.
1 Select your desired band.
2 Press [VFO].
3 Select your desired frequency for the lower limit.
4 Press [F].
•A memory channel number appears and blinks.
5 Turn the Tuning control, or press Mic [UP]/
[DWN], to select a channel (L0 ~ L9).
1 s