Filter
Top Products
28
6
3 Press [
cc
cc
c]/ [
dd
dd
d] to select the appropriate tone
frequency.
4 Press [OK] to complete the setting.
When using a MC-58DM, you can also use its keypad
to select a tone frequency. First program one of the
Mic PF keys as the ENTER key {page 60}. In step 2
(above), press [ENTER], then enter 01 to 38 to select
the frequencies listed in the above table. To select
79.7 Hz, for example, press [ENTER], [0], [5].
■ Activating Tone Function
Press
[TONE] to activate the Tone function.
• “T” appears when the Tone function is ON.
• Each press of [TONE] changes the selection as Tone ➔
CTCSS ➔ DCS ➔ No selection.
Note:
◆ You cannot use Tone with the CTCSS and DCS functions.
◆ You need to activate the Tone function only when selecting
one of the 38 standard frequencies. The selection you make
here will not affect transmission of a 1750 Hz tone.
■ Selecting a Tone Frequency
Note: The procedures for transmitting a 1750 Hz tone are
described on page 30.
1 Press
[TONE] to activate the Tone function.
• “T” appears when the Tone function is ON.
2 Press [F], [T.SEL].
• The current tone frequency appears and blinks. The
default is 88.5 Hz.
.oN
.qerF
)zH(
.oN
.qerF
)zH(
.oN
.qerF
)zH(
.oN
.qerF
)zH(
100.76114.79125.631138.291
209.17210.001223.141235.302
304.47315.301322.641337.012
400.77412.701424.151431.812
507.97519.011527.651537.522
605.28618.411622.261636.332
704.58718.811729.761738.142
805.88810.321828.371833.052
905.19913.721929.971
018.49028.131032.681