Filter
Top Products
External Control
Runco X-200i Series Installation/Operation Manual 83
PRE
L
IMINAR
Y
(none) 0x87 0xC7 Switch to 2.2 gamma.
0x8B 0xCB Switch the active source to HDMI 1.
0x8C 0xCC Switch the active source to HDMI 2.
0x8D 0xCD Switch the active source to Component 1.
0x8E 0xCE Switch the active source to Component 2.
0x8F 0xCF Switch the active source to RGB.
(none) 0x90 0xD0 Toggles between blank screen and regular
display.
(none) 0x91 0xD1 Turn blank screen on.
(none) 0x92 0xD2 Turn blank screen off.
(none) 0x93 0xD3 Switch to the next Overscan mode.
(none) 0x94 0xD4 Switch to Overscan Zoom.
(none) 0x95 0xD5 Switch to Overscan Crop.
(none) 0x96 0xD6 Switch to Overscan Off.
(none) 0x97 0xD7 Switch to the next user memory.
0x98 0xD8 Recall Custom 1 user memory.
0x99 0xD9 Recall Custom 2 user memory.
0x9B 0xDB Recall ISF Day user memory.
0x9C 0xDC Recall ISF Night user memory.
0x9D 0xDD Switch to the next aspect ratio.
0x9E 0xDE Apply 16:9 aspect ratio to the active
source.
0x9F 0xDF Apply 4:3 aspect ratio to the active source.
0xA0 0xE0 Apply Letterbox aspect ratio to the active
source.
0xA2 0xE2 Apply VirtualWide aspect ratio to the active
source.
0xAF 0xEF Apply Cinema aspect ratio to the active
source.
Table 6-1. Serial Command Key Names and IR Codes (continued)
RS232
Keyname
Remote
Button
IR Code
Description
Set 1 Set 2