Filter
Top Products
Operation
Runco X-200i Series Installation/Operation Manual 49
PRE
L
IMINAR
Y
4.1
Selecting Video
Memory
Press ISF NIGHT, ISF DAY, CUST1 or CUST2 to recall settings from a
memory preset. Then, press ENTER to confirm your selection. Or, to cancel the
operation, press
to select Cancel and press ENTER.
4.2
Selecting an Aspect
Ratio
To select the appropriate aspect ratio for the type of program
material being viewed, press one of the aspect ratio buttons. Or,
press the aspect ratio (
) button repeatedly.
For more information on aspect ratios, refer to Table 4-1.
4.3
Selecting An Input
Source
When you turn on the X-200i, it switches to the last selected input and looks for
a valid signal.
Use these buttons on the remote control to select an input source directly, as
follows:
1 = HDMI 1
2 = HDMI 2
3 = Component 1
4 = Component 2
5 = RGB
4. Operation