Filter
Top Products
External Control
Runco X-200i Series Installation/Operation Manual 89
PRE
L
IMINAR
Y
3D.syncdelay = ?
100 +/- 40 ms
3D.syncinvert = ?
0 = Normal
1 = Inverted
power.chime = ?
0 = Off
1 = On
errcode ?
Refer to RS-232 Error Codes
on page 91.
lamp.vol ?
<string> returns lamp voltage
cinewide = ?
0 = Off
1 = CineWide
2 = AutoScope
red.hsg.hue
yellow.hsg.hue
green.hsg.hue
cyan.hsg.hue
blue.hsg.hue
magenta.hsg.hue
= ?
0-200 Personal Color Equalizer (PCE)
hue settings.
red.hsg.sat
yellow.hsg.sat
green.hsg.sat
cyan.hsg.sat
blue.hsg.sat
magenta.hsg.sat
= ?
0-200 Personal Color Equalizer (PCE)
saturation settings.
red.hsg.gain
yellow.hsg.gain
green.hsg.gain
cyan.hsg.gain
blue.hsg.gain
magenta.hsg.gain
= ?
0-200 Personal Color Equalizer (PCE)
level settings.
white.red.gain
white.green.gain
white.blue.gain
= ?
0-200 Personal Color Equalizer (PCE)
white balance settings.
msgbox = ?
0 = On
1 = Off
This control enables or disables
the display of power off, source
and adjustment message boxes
(brightness, contrast etc.). Default
value is ON.
Table 6-2. Serial Commands (continued)
Operation Commands Values Notes