Filter
Top Products
Installation
Runco X-200i Series Installation/Operation Manual 47
PRE
L
IMINAR
Y
Adjusting the Horizontal Position and Yaw:
1. Project a white field on the screen.
2. Release the Swell Latches to allow the lens assembly to pivot and move freely from
side to side.
3. Slowly move the anamorphic lens into place (from right to left or vice versa) so that
there are no shadows on either side of the screen:
4. Angle the lens to even out any left-right pincushion distortion:
5. When the horizontal position and lens angle are properly set, engage the Swell
Latches to secure the lens in place.
Too Far Right
Too Far Left
Correct position
Wrong Position
Correct Position
Anamorphic Lens (Top View)