Filter
Top Products
Installation
Runco X-200i Series Installation/Operation Manual 27
PRE
L
IMINAR
Y
Installing the Fixed
CineWide Base Plate
(Cylindrical Anamorphic
Lens)
To install the fixed CineWide base plate on a X-200i/CineWide with a cylindrical
anamorphic lens:
1. Place the projector upside down on a blanket or other soft surface.
2. Place the CineWide base plate on the bottom of the projector.
3. If you are mounting the projector on a ceiling: Line up the three holes on the left
and right mounting rails (included with the projector ceiling mount kit) with those on
the bottom of the projector and CineWide base plate.
4. Secure the CineWide base plate (and ceiling mounting rails, if needed) to the projector
with the Pan-Head Phillips screws provided with the CineWide lens base plate. See
Figure 3-10.
Figure 3-10. X-200i/CineWide with McKinley (Cylindrical) Lens Base Plate and
Ceiling Mounting Rails - Bottom View
1. Do not use the mounting screws provided with the ceiling
mounting kit. Use only the hardware provided with the CineWide
lens base plate.
2. DO NOT OVER-TIGHTEN THE SCREWS.
Caution