Filter
Top Products
Installation
28 Runco X-200i Series Installation/Operation Manual
PRE
L
IMINAR
Y
3.5
Mounting the X-200i
There are several methods for mounting the projector. Depending on your chosen
installation, one method may be more suitable than another.
Floor Mounting (Upright) In typical front and rear screen installations, the projector can be mounted to a secure and
level surface such as a table or cart. Carts are useful when moving a projector during a
presentation or from site to site. If possible, lock the wheels when it’s in position to prevent
it from being moved during a presentation.
Ceiling Mounting
(Inverted)
For fixed installations, and for those that want the projector out of sight or have a limited
space for projector and audience, you can invert the X-200i and suspend it from the
ceiling using a specially-designed ceiling mount fixture.
For detailed installation instructions, refer to the documentation provided with the ceiling
mount kit.
Adjusting the Projection
Angle
If the screen is significantly higher or lower than the projector, you can also tilt the
projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling
mount.
For a floor installation, turn the adjustable feet at the bottom of the projector to adjust the
projection angle.
If you do this, you may need to vertically shift the image to compensate. For detailed
instructions, refer to
Lens Adjustments on page 37.
➤
➤
➤