Filter
Top Products
Controls and Functions
10 Runco X-200i Series Installation/Operation Manual
PRE
L
IMINAR
Y
2.4
X-200i Remote Control
1. ON
Use this button to turn the projector
on.
2. OFF
Use this button to turn the projector
off.
3. Aspect Ratio Selection Buttons
Press one of these buttons to select
an aspect ratio:
16 : 9: For viewing 16:9 DVDs or
HDTV programs in their native aspect
ratio.
4 : 3: Scales the input signal to fit 4:3
sources in the center of the screen.
LETBOX (Letterbox): For viewing
non-anamorphic (“full-screen”) DVDs
on a 16:9 screen.
V-WIDE (VirtualWide): Enlarges a
4:3 image horizontally in a non-linear
fashion to fit a 16:9 full screen
display.
CINEMA: For viewing 2.35:1 source
material.
V-CINE (Virtual Cinema): Selects
the Virtual Cinema aspect ratio, used
for viewing 16:9 source material on a
2.35:1 screen.
4. Cursor Keys ( , , , )
Use these buttons to select items or settings, adjust settings or switch display
patterns.
ENTER
Press to select a highlighted menu item or confirm a changed setting.
5. MENU
Press this button to show or hide the OSD controls.
6. Aspect Ratio Selection Button
Press this button repeatedly to select an aspect ratio.
7. Source Selection Buttons (1-5):
Press to select a video source. These buttons are assigned as follows: 1 = HDMI 1;
2 = HDMI 2; 3 = Component 1; 4 = Component 2; 5 = RGB.
8. Contrast
Press to adjust white level.
For more information about aspect ratios, refer to Table 4-1.
12
11
1
2
6
8
5
7
3
10
9
4
Note