Filter
Top Products
Operation
50 Runco X-200i Series Installation/Operation Manual
PRE
L
IMINAR
Y
4.4
Using the On-Screen
Menus
1. Press the MENU button on the remote
control or system keypad to display the
Master Menu.
2. There are six menus. Press or to
select a sub-menu, then press ENTER
(remote control unit) or SELECT
(system keypad).
3. Press or to select a sub-menu
item.
4. For each sub-menu item, the
currently-selected value appears in
white text or is otherwise highlighted.
Press
or to choose a setting for
that item, or press ENTER (remote
control unit) or SELECT (system
keypad) to go to another sub-menu.
5. Press MENU to return to the previous menu.
6. From the Master Menu, press MENU to turn off the OSD menu.
The X-200i OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending on
the selected input source and signal characteristics, some menu options may not be
available.