Filter
Top Products
Controls and Functions
8 Runco X-200i Series Installation/Operation Manual
PRE
L
IMINAR
Y
6. RS-232
A female, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
7. RGB
Provides a standard, 15-pin VGA-style connection to either an RGB or component
high-definition source, or to a personal computer. The X-200i automatically detects
the input signal resolution.
8. USB
A standard, Type A USB connector for performing firmware upgrades. Can also
provide power to a 3D emitter.
9. COMPONENT 2
Three BNCs for connecting component (YPbPr) video sources.
10. COMPONENT 1 (RCA connectors)
Standard- or high-definition (480i/480p/576i/576p/720p/1080i/1080p) Component
(YPrPb) input for connecting a DVD/HD-DVD/BD player, HD set-top box or other
SD/HD source.
11. SYSTEM KEYPAD AND LED INDICATORS
Provides an alternative to using the remote control unit to navigate the On-Screen
Display (OSD) controls (refer to
Controls and Indicators on page 9).
12. 3D SYNC
A 3-pin, VESA standard mini-DIN connector for connecting the Active 3D Emitter to
the projector (see
Figure 3-17).