Filter
Top Products
Installation
Runco X-200i Series Installation/Operation Manual 37
PRE
L
IMINAR
Y
3.8
Lens Adjustments
The X-200i gives you a great deal of control over the picture size, position and focus.
Focus and ZoomTo focus the projected image, grasp the lens
by the front ring and rotate it.
To make the picture smaller (zoom out), slide
the zoom control to the right.
To make the picture larger (zoom in), slide the
zoom control to the left.
To lock the position of the lens, tighten the
knob with a flat-blade screwdriver.
Lens Shift
Vertical Lens Shift: To shift the projected
image vertically, first ensure that the lens lock
is not engaged. Insert the provided hex
wrench into the vertical lens shift adjuster on
the side of the projector. Then, turn the
wrench to shift the lens in the desired
direction.
Horizontal Lens Shift: To shift the projected
image horizontally, first ensure that the lens
lock is not engaged. Insert the provided hex
wrench into the horizontal lens shift adjuster at
the top of the projector. Then, turn the wrench
to shift the lens in the desired direction.
Zoom Out
Zoom In
Focus
Do not attempt any lens adjustments when the lens lock is
engaged. Doing so may cause damage to the zoom or lens shift
mechanisms.
THE LENS SHIFT MECHANISM CAN BE DAMAGED BY
EXCESSIVE FORCE. Do not attempt to move the primary lens
beyond its normal adjustment range.
Caution
WARNING
Vertical
Lens Shift
Control
Horizontal
Lens Shift
Control