Filter
Top Products
Controls and Functions
Runco X-200i Series Installation/Operation Manual 11
PRE
L
IMINAR
Y
9. Brightness
Press to adjust black level.
10. Memory Preset Buttons:
ISF NIGHT
Press to recall settings for the current input from the “ISF Night” memory preset.
ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
CUST 1
Press to recall settings for the current input from the “Custom 1” memory preset.
CUST 2
Press to recall settings for the current input from the “Custom 2” memory preset.
11. 3D Mode Selection Buttons:
3D AUTO
Press to set the 3D Mode to Auto.
3D SBS (Side-by-Side)
Press to set the 3D Mode to 3D Side-by-Side.
3D TAB (Top-and-Bottom)
Press to set the 3D Mode to 3D Top-and-Bottom.
12. LIGHT
Press momentarily to activate remote backlighting.
For more information about 3D modes, refer to 3D Mode on
page 58.
Note