Filter
Top Products
LexiconMPX G2 User Guide
9-30
Programs 245-248 are set up to have the MPX G2 front panel buttons or the MPX R1
control:
Tap = Record Loop
A/B = Layer
Delay = Clear Loop
245 Jam 1 S&H+
Loads with moderately clean preamp and a Sample & Hold style effect into a large hall
Reverb. The MPX R1 pedal controls the volume, or volume with sweep filter scale,
depending on the state of the Toe Switch.
246 Jam1Cordovox
Loads with a creamy overdriven preamp and a Cordovox effect with reverb. The MPX R1
Toe Switch turns the Cordovox effect on and off, the pedal controls the Cordovox speed.
Programs 247 and 248 are set up to have the MPX G2 front panel buttons or the MPX
R1 control:
Tap = Record Loop
A/B = Replace
Delay = Start/Stop Loop
247 Jam 2 Pitch+
Loads with high-gain preamp, Pitch and Ambience. The MPX R1 Toe Switch swaps pedal
controls between volume (Toe Switch off) and pitch (Toe Switch on).
248 Jam2AutoWah
Clean style preamp with auto wah. The MPX R1 Toe Switch determines whether the
pedal controls volume or wah.
249 Unity Gain
This program is set up for testing a unity gain signal in all configurations.
250 Clean Slate
Want to start from scratch? This one’s as empty as they get.
JamMan
(Stand Alone)
Utility
(All Configurations)