Filter
Top Products
Lexicon
7-24
MPX G2 User Guide
Mix 0-100% Dry/Wet ratio
Level Off, -89 to +6dB Amount of effect in the processed signal
Rate1 0-50Hz or Left Mod rate or period ratio.
1:24-24:1 cycles/beat
(Rate 1 Units) Selects frequency or cycles/beat
PW 1 0-100% Left Mod pulse width
Dpth1* 0-100% Left Mod depth (tremolo)
Rate2 0-50Hz or Right Mod rate or period ratio.
1:24-24:1 cycles/beat
(Rate 2 Units) Selects frequency or cycles/beat
PW 2 0-100% Right Mod pulse width
Dpth2* 0-100% Right Mod depth (tremolo)
Res1 -100 to +100 Cross resonance
Res2 -100 to +100 Resonance
Mix 0-100% Dry/Wet ratio
Level* Off, -89 to +6dB Amount of effect in the processed signal
Rate1 0-50Hz or Drum rate or period ratio
1:24-24:1 cycles/beat
(Rate1 Units) Selects frequency or cycles/beat of drum
Dpth1* 0-100% Drum depth (tremolo)
Rate2 0-50Hz or Horn rate or period ratio
1:24-24:1 cycles/beat
(Rate2 Units) Selects frequency or cycles/beat of horn
Dpth2* 0-100% Horn depth (tremolo)
Res -100 to +100 Resonance
Width* 0-100% Panning width for horn and drum
Bal -50 to +50 Relative level of horn and drum
Aerosol
Rotary Cab
Aerosol is a true stereo chorus/
flanger with dual rate, depth and
resonance controls. It can pro-
duce very deep resonant flange
sweeps, subtle multi-vibrato, ste-
reo image enhancement and a
wide variety of other chorus and
flanger-like effects.
A pair of single-tap modulated
delays is each modulated by a
separate LFO. Pulse Width allows
independent adjustment of left and
right LFOs from full left to full right
skew. (At 0, the sinewave becomes
a sawtooth with a fast rise and
slow fall.) Depth controls provide
adjustment of modulated depth
from 0-100%.
This effect simulates a Leslie
speaker with one pair of stereo
mics on the rotating low-frequency
drum, and another pair on the ro-
tating high-frequency horn. Bal sets
the relative mix of Drum and Horn
mics. Width controls the stereo
spread of both pairs of mics. Rate
and Depth 1 control the speed and
depth of the rotating low-frequency
drum. Rate 2 and Depth 2 control
the speed and depth of the rotating
high-frequency horn. The preset,
Rotary Cab, is set up so that A/B
switches the speed from fast to
slow. Different A and B rates are
used to simulate the inertia of the
mechanical system.
76 190
* = Interpolated; ( ) = Option of preceding parameter
59 190