Lexicon MPX G2 Stereo Amplifier User Manual


 
LexiconMPX G2 User Guide
9-18
133 S/H Pedal
A recreation of the Maestro pedal used by Frank Zappa in the 70's.
134 V-Wah
Our recreation of the classic Vox Wah. The MPX R1 pedal controls the wah sweep. The
Toe Switch turns the wah on and off like the original.
135 Modern Trem
A modern (alternative style) tremolo with a sharper, square wave type feel than a vintage
tremolo.
136 Tap Echo
Tap sets the echo rhythm. A/B turns the input to the echo on and off (so that the repeats
ring out when you turn it off). The MPX R1 pedal sets the loudness of the echoes. Press
Soft Row for instant access to all of the delay parameters.The program loads with delay
time set to 2 echoes/beat (8th note). Be sure to experiment with different values.
137 Env Wah
The sweep of this wah is dynamically controlled by your playing. Similar to the sound of
a Mu-tron III set to BP.
138 StereoChorus
A lush Lexicon stereo chorus designed to be used before your amp’s input.
139 Classic Detune
This program puts a dual pitch shifter in front of your amp. It loads set to the classic ±8
cent values — but feel free to tweak these.
Programs 140-145 are optimized for bass sounds.
140 BassComp1
A preamp and compressor.
141 BassCompChrs
A preamp compressor and chorus.
142 Bass Fuzz
A preamp with distortion.
143 BassPitchPdl
A preamp with a pedal controlling the pitch up and octave. Press A/B to go up or down
an octave.
144 BootsyBass
Bass preamp with a Bootsy-style auto wah.
Bass Effects
(Amp Input Only)