Barco R9010050 Home Theater System User Manual


 
8. Random Access Adjustment Mode
8.5.7.4 Output Mode
What can be done?
Within the output mode menu, it is possible to select a new output m ode for a given input signal.
The input signal can be:
interlaced.
non-interlaced.
How to adjust the Output Mode?
1. Push the cursor key or to highlight Output Mode and press ENTER to select. (m enu 8-21)
If y our input signal is PAL or SECAM signal following menu will be displayed: (menu 8-22)
If it is a NTSC signal following menu will b e displayed: ( menu 8-23)
2. Push the cursor key or to highlight the desired scan rate e.g. 100H z 625 Lines NI an d press ENTER to activate. (menu 8-24)
50Hz Vertical frequency of the image
1250 Lines Quantity of horizontal lines
N I = Non Interlaced = Progressive Scan Interlace mode
3. Press EXIT to return to the Image Processing menu.
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING: ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
SPLIT SCREEN: OFF
ADVANCED SETTINGS
Select with
or
then <ENTER>
<EXIT> to return
Menu 8-21
LINE MULTIPLIER
OUTPUT MODE
50Hz 625 Lines NI
50Hz 935 Lines NI
100Hz 625 Lines NI
50Hz 1250 Lines NI
100Hz 1250 Lines I
Select with
or
then <ENTER>
<EXIT> to return
Menu 8-22
LINE MULTIPLIER
OUTPUT MODE
60Hz 525 Lines NI
60Hz 785 Lines NI
120Hz 525 Lines NI
60Hz 1050 Lines NI
120Hz 1050 Lines I
Select with
or
then <ENTER>
<EXIT> to return
Menu 8-23
LINE MULTIPLIER
OUTPUT MODE
50Hz 625 Lines NI
50Hz 935 Lines NI
100Hz 625 Lines NI
50Hz 1250 Lines NI
100Hz 1250 Lines I
Select with
or
then <ENTER>
<EXIT> to return
Menu 8-24
8.5.7.5 Video Equalizing
What can be done?
The sharpness of the image can be adjusted for 3 frequency bands (low, medium and high) separately. In addition to the 7 prepro-
grammed factory presets a customized adjustment of the sharpness for 3 ranges is also possible.
How to adjust Video Equalizing?
1. Push the cursor key or to highlight Video Equalizing and press ENTER to select. (menu 8-25)
The Video Equalizing m enu will be displayed. (im age 8-1)
2. Push the or keys to selec t the desired frequency band (Low, M id or High) or the Factory P reset : x.
3. Push the cursor key or to adjust the sharpness in the chosen frequenc y band ( Low, Mid or High) or to scroll through the
factory presets (x = 1 to 7).
Note: Factory preset 8 is equal to the custom adjustment as made with low, mid and high.
4. Press EXIT to return to the Image Processing menu.
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING: ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
SPLIT SCREEN: OFF
ADVANCED SETTINGS
Select with
or
then <ENTER>
<EXIT> to return
Menu 8-25
R5976584 BARCO CINE7 26022003 59