Filter
Top Products
A. Source Numbers 81 — 86 and 91 — 96
A. SOURCE NUMBERS 81 — 86 AND 91 — 96
A.1 Projector without any 800 peripheral connected
Overview
The source num bers 81 - 86 and 91 - 96 do not correspond to physical inputs. An additional adjustment file can be cr eated for these
source numbers. This file can contain different settings. Th e relationship between sources 1 - 6 and 91 - 96 or between 1 - 6 and
81 - 86 is shown in the diagram below.
Source input 1 source number 1
source number 81
source number 91
file A
file A’
file A”
Source input 2 source number 2
source number 82
source number 92
file B
file B’
file B”
Source input 3 source number 3
source number 83
source number 93
file C
file C’
file C”
...
Source input 6 source number 6
source number 86
source number 96
file F
file F’
file F”
How to create a second source?
Follow the steps below to c reate a second or a third file for sources 1 to 6 :
1. Select the source between 1 and 6.
2. Select the cor responding source number between 81 and 86 or 91 and 96 with the digit keys on the RCU.
3. Enter the adjustment mode and load a corresponding file. Ed it this file if necessary.
4. Save the file and exit the adjustment mode.
A.2 Projector with a 800 peripheral connected
Overview
• Source numbers 91 — 96
• Source numbers 81 — 86
A.2.1 Source numbers 91 — 96
Overview
The source number
s 91 - 99 do not correspond to physical inputs. An additional adjustment file can be created for these source
numbers (source numbers of the 800 peripheral). This file can c ontain different settings. The relationship between s ources 1 - 9 of
the 800 pe ripheral and 91 - 99 is shown in the diagram below.
source input 1 source input 1
source input 91
file A
file A’
source input 2 source input 2
source input 92
file B
file B’
R5976584 BARCO CINE7 26022003
103