Filter
Top Products
4. Getting Started
Overview Picture controls
When an image control is pressed, a text box with a bar scale, icon and function name of the control, e.g. ’brightness...’ appears on
the screen (only if text is ON). See ex ample sc reen. The length of the bar scale and the value of the numeric indication indicate the
current memorized setting for this source. The bar scale changes as the control stick on the RC U is pressed or the + or - buttons
on the local keypad.
Brightness A correct ’brightness’ setting is important for good image reproduction.
Use the + b utton for a higher brightness.
Use the - button for a lower brightness.
Contrast A c orrect ’contrast’ setting is important for good image reproduction. Adjust the contrast to the level
you prefer, acco rding to room lighting conditions.
Use the + button for a higher contrast.
Use the - button for lower contrast.
Color Color saturation is only active for Video and S-Video. Adjust the color intensity of the picture.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint Tint is only active for Video and S-Video when us ing the NTSC 4.43 or NTSC 3.58 system.
Use the + button
Use the - button.
Sharpness Use the + button for a sharper picture.
Use the - button for a softer picture.
Phase Use the + or - button to adjust the phas e.
Freez Press Freez to freeze the display ed image.
Overview Sound Controls
Only when a sound u nit is built in.
When a sound control is pressed, a text box with a bar scale, icon and function name of the control, e.g. ’volume...’ appears on the
screen (only if text is ON). See example screen. The length of the bar scale indicates the current memorized setting for this source.
The bar scale changes as the + or - buttons of the control are pressed. The sound con trols ca n only be adjusted w ith the RCU.
Volume Volume control adjusts the volume.
Use the + button for a higher volum e.
Use the - button for a lower volume.
Bass Bass control adjusts the bass level (low tones).
Use the + button for more low tones.
Use the - button for less low tones.
Treble Treble control adjusts the treble level (high tones).
Use the + button for more high tones.
Use the - button for less high tones.
Balance Is only effective if a external amplifier with loudspeakers is connected to the audio output. T he balanc e
control a djust the sound level between the left and the right box.
Use the + button for a higher sound level on the right box than on the left on e.
Use the - button for a higher sound level on the left box than on the right one.
The Pause Key
When the Pause key is pressed, the image projection is stopped, a blue or black screen will be displayed and the projector remains
with full pow er for immed iate restart. The sound is not interrupted. The display on front of the projector will show a "P".
R5976584 BARCO CINE7 26022003
29