Barco R9010050 Home Theater System User Manual


 
5. Start up of the adjustment mode
5. START UP OF THE ADJUS TMENT MODE
5.1 How t o start up the adjustment mode
Start up using the RCU
1. Press the ADJUST key.
The projector displays the m ain menu. (menu 5-1)
MAIN MENU
Image control
Iris control
Sound control
Function keys
Service menus
Select with
or
then <ENTER>
<EXIT> to return
Menu 5 -1
Start up using the local keypad
1. Press the ADJUST key.
The projector displays the G eneral Access menu. (image 5-1)
2. Use the cursor keys to highlight entern ADJUST.
3. Press ENTER.
The projector displays the m ain m enu (menu 5-1).
Image 5-1
To adjust the Analog picture controls with the loc al keypad w hile in the ’Adjustment mode’, press the ADJU ST
key. T he next General Access menu will be displayed.
Possible paths
Depending on the projector configuration the following paths are pos sible with the ’Main menu’.
Image Control - Allows to change the color temperature of the image and to select anothe r format (adjustment) for the im age.
IRIS-Control - This selection will only be available when the autoconvergence unit IRIS is built in into the projector. This control
will allow to align the projector automatically.
Sound Control - Allows to select the sound mode (only when a sound unit is built in).
Function Keys - Gives an ove rview of the programmed function for each key.
Service Me nus - Installation and adjustm
ent menus to s et up the projector. Before entering a warning will be displayed.
R5976584 BARCO CINE7 26022003
31