Filter
Top Products
3. Source Connections
3.2 Connecting a Composite Video source.
Which signal to the video input?
Connect Composite video signals from a V CR, OFF air s ignal decoder, etc..
If a line multiplier is built in, the default position of this line multiplier soft option is ON (active). The video
input signal will be d isplayed as a n on interlaced image (= improved image stability). To en able or to disable
this function, enter the adjustment mode and change the position of the ON/OFF toggle s witch (see chapter
’Random access’ adjustment mode).
Image 3-2
Video connection
Video input selection via the RCU
1. Press digit button 1
Video input selection via the k eypad
1. press ADJUST key.
The General access menu is dis played on the sc reen. (image 3- 3)
2. Use the cursor keys to highlight 1.
3. Press ENTER to select the highlighted s ource.
Image 3-3
12 R5976584 BA RCO CINE7 26022003